Exair’s double 316 hardened steel bureau cooler® keeps electrical nooks cool at – 7°C air. Simultaneously it can oppose warmth and erosion that can influence inside segments antagonistically. Its wear, consumption, and oxidation obstruction guarantees long life and an activity that is without upkeep. The cooling limit goes up to 5,600 Btu/hr and is consequently appropriate for huge walled in areas and furthermore stacks with high warmth. Models that have lower cooling limits, for the NEMA 12, 4 and 4X sorts of fenced in areas can likewise be made accessible. Exair coolers flow – 7°C air and forestall glitches because of high temperature. The cooler incorporates a programmed channel separator to guarantee that no dampness goes inside the electrical fenced in area. A discretionary indoor regulator control limits coThe various water amount control framework in particular structure that is accessible in a few renditions satisfies at the very least three prerequisites simultaneously. In one framework, it consolidates the upsides of the ordinary water wholesalers, the drive cooling frameworks and the consistently working temperature control units while dispensing with the inconveniences of every one of these frameworks. The temperature control framework discards up to 128 exclusively movable circuits and is reasonable for the handling of polyolefins and specialized thermoplastic materials.

If there should arise an occurrence of the fundamental execution (itd B) the mentioned stream rate is balanced physically, much the same as at the ordinary water wholesaler, yet is then observed by a stream meter and introduced carefully and graphically on the focal presentation of the control unit.

In the standard execution (itd R) the water amount is separately set for each circuit at the focal working unit and – if important – is rearranged consequently through a water amount guideline valve inside movable cutoff esteems.

Contingent upon the execution stream rates somewhere in the range of 1,8 and 32 l/min at water temperatures up to 95°C individually 120°C can be directed. The top-up of temperature controlled water with the flexibly temperatures requested by the procedure is acknowledged by upstream units of the gwk teco series.mpressed air use.